The dishwasher is one of the important tools in the kitchen that may help the housewife when preparing food and after eating lunch, by putting the dishes inside to clean them with ease, and in many cases we need to change the dishwasher to a new one and we retreat or get lazy; Because of the need for a technician to replace it, but there is an easy way to remove the old dishwasher, and to find out the method, you can follow the following report, according to the “thespruce“.

Before starting anything:

You must search for the wire that provides power to the existing dishwasher, and disconnect it from the wall socket, and most of the time the wall socket is under the sink.

After that, the water is closed, knowing the location of the shut-off valve, which controls the water line in the dishwasher, and it will also be located under the kitchen sink, and it is connected to the hot water pipe, which controls the water from the faucet and the dishwasher.

dish washer

Instructions:

Separation of the water source:

Before removing the dishwasher, the two pipes that connect to the plumbing system must be disconnected. The first is the water supply pipe, which is usually a small copper or plastic pipe. If you have a dedicated shut off valve, it is a connection. Conduit lock pliers can be used to disconnect the dishwasher supply tube from the shut off valve outlet. hot.

Water separation

Drain line separation:

The dishwasher is connected to the plumbing system via the drain line. The location of the rubber hose coming from the washing machine must be located and the end of the connection must be known. The clamp holding the hose to the air gap must be loosened with the hose separated.

air gap

Remove the mounting brackets:

Most of the time the dishwasher is held in place by a pair of metal brackets. Open the door of the machine and look under the edge of the kitchen counter, removing the brackets holding the dishwasher.

mounting brackets

Lowering the dishwasher:

Before thinking of removing the dishwasher from its place, the legs must be unscrewed, by removing the front panel in the lower part of the face of the dishwasher, and then the wrapped legs are rotated in a clockwise direction while lowering the body of the dishwasher.

Removing the dishwasher:

The dishwasher is removed from its cabinet, by carefully pulling it out, then placed on the floor, and the new dishwasher installed.

Take out the dishwasher